|
FG-7020 / Elastic
band ESD heel straps
ESD heel straps are specially designed to
provide a continuous ground path between the user and a properly
grounded ESD floor. Our
ESD heel straps are designed to drain the static charge of a user
that is built up during normal activity. They offer instant
static dissipation for rapid protection. Job functions which
require worker mobility should use heel grounders. Failure to
wear a heel straps can cause potential damage to the equipment
which the user operates and the components they contact.
FG-7020 SC
Elastic Hook and Loop ESD Heel Strap
MSRP:
$5.95
Specifications:
- Heel Cup: .060" (1.5mm) thick 1-3/8" wide dual elastomer
with non-smudging interior and black (non smudging where
noted) exterior
- Heel Cup Resistivity: 103-105
Ohms/sq.
- Hook/Loop – Velcro fluorescent green
- Resistor: One megohm value ¼ watt (+/-10%) carbon film
resistor
- Tab: Blue (or customized) 3/8" wide fray resistant
polyester tab with conductive carbon suffused fibers
- Tab to Cup Resistance: 1x106 - 1x107
Ohms
All Ohm-Stat foot grounders can be adjusted to fit the user.
The Ohm-Stat Heel Grounder line has four unique styles to fit a
wide variety of men's and women's shoes, boots, safety shoes,
loafers, tennis shoes, and running shoes. They are easy cleaned
with mild detergent and water. To assure that a continuous path
to ground is maintained, the user should wear the ESD footwear
on both feet. A heel grounder should be used on a floor surface
with a resistivity of less than 1010 Ohms/sq.
Heel
Grounders can be custom ordered with the following:
- Larger cup sizes to fit "cross trainer" style shoes and
work boots
- Longer length tabbing for boot styles (cowboy, etc.)
- Customized colors
- Private label and design
|
