|
ElectraFlow ® ESD
Ionizers for Static Control
High Power ESD
Ionizers for Static
Control and Dust Free Manufacturing!
ElectraFlow Standard ESD Ionizers
It's no secret! Items
and objects charged with even a minute amount of static
electricity attract and hold dust and contaminants (just like
the screen of that old school television set you may have at
home;) In many cases these contaminants can be briefly removed
with a standard compressed air stream only to reattach a few
minutes later. Thorough, long term dust removal requires
reducing static from "the object" prior to removal with the
compressed air stream. Our ionizing air
curtains eliminate static from the object allowing the built in
high volume air stream to thoroughly remove contaminants for
long term dust free packaging and manufacturing. Static
generation (often a by product of many manufacturing operations)
can also cause a multitude of problems from interrupted pellet
flow to annoying static discharges to personnel. ElectraFlow air
curtains can be used to eliminate static electricity from ANY
charged object! Outstanding high volume, high efficiency and low
maintenance. Perfect for a multitude of uses including final
packaging and assembly, slitting, web applications and any
source of static generation. ElectraFlow: Tames the Static Beast Before it Takes Another
Byte! Note: all ionizers meet
or exceed stringent specifications as listed below and are fully warranted. Like all ionizers
built by any Company they are a non returnable item. Please
choose your selection carefully.
ElectraFlow SL-041 High Volume ESD Ionizing Air Curtain
expand photo
Our SL-041 high velocity air curtain works with compressed
air for superior targeted removal of contaminants including dust
and dirt. This unit features focused air streams. Perfect for
finishing applications, packaging, food and beverage
manufacturing and printing applications. Available in lengths up
to 1,300 mm (700 mm standard). Includes our SL-009 Power supply.
ElectraFlow SL-041 High Volume Air Curtain with Tightly Focused
ionized air stream. Price: $447.00 (includes SL-009 power
supply) and FREE SHIPPING!
ElectraFlow SL-040 ESD / Contaminant Control Air Bar
·
expand photo
The SL-040
Ionizing Air Bar is a versatile solution to demanding esd and
contamination control requirements. This unit features
wide bell shaped air streams, rugged aluminum
housing and long life emitter points. Manufacturing
excellence by our ISO approved factory.
·Requires our SL-009 Power supply (included with your order).
ElectraFlow SL-040 ESD / Contaminant control Air Bar
Price:
$447.00 Each and FREE SHIPPING* Call for quantity discounts
Specifications
|
HV Cable Length |
3,000 mm |
|
Maximum & Minimum Length
|
1,500 mm and 200 mm |
|
Operating Temperature |
20 ~50°c |
|
Relative Humidity |
<60% |
|
Current Consumption |
0.4ma |
Decay
Test Results
|
Distance |
Decay Time |
|
|
Without Compressed Air |
With compressed air |
|
20mm |
0.02s |
0.1s |
|
40mm |
0.02s |
0.1s |
|
60mm |
0.6s |
0.3s |
|
80mm |
1.7s |
0.4s |
|
100mm |
|
0.6s |
|
300mm |
|
1.5s |
|
600mm |
|
2.5s |
|
Testing Voltage |
5Kv~500v |
Remarks:
1. Distance measured in mm, decay
time measured in seconds.
2. Test data available via ME268A
Charge Plate Analyzer
3. Test figures subject to variation
of atmospheric conditions
Instruction overview (see full
instruction manual provided with
unit prior to use of this device).
The SL-040 is designed to work with
clean, moisture and oil free
compressed air that has been
filtered to <5 microns. This unit
requires a minimum
air volume of 15 CFM. Clean and
purge all air filters and regulators
prior to initial use of this deice.
This device is designed to provide
years worth of reliable service but
IS NOT WARRANTED for malfunctions
caused from a contaminated air
supply. Set air pressure to the
minimum required to do the job.
Excess air use is wasteful and
dilutes the ionization while
increasing the operating noise level
of the unit.
SL 006
B
ElectraFlow SL-006B Powerful Static Control AC
Eliminator Bar.
Heavy Duty Applications, rewinding and all web
applications
Please
call for specifics and pricing
The SL-060
Ionizing Air Cannon: Industrial Strength Static Control Air
Cannon.
Perfect for sheeting, slitting, rewinding,
and web
applications applications.
·
Double click to expand, go
back to return
ElectraFlow®
Dependability,
Power, Quality and Value!
At United we've provided cost effective
yet high quality esd ionizers for 10 years! Our
recent additions in ionizing air curtains and high performance
static elimination bars completes the circle for heavy duty
industrial use while our high volume purchasing power and buying
direct from our (ISO approved) manufacturer allows us to pass
savings AND quality along to your Company.
|
