HOME

Live Support

Immediate Assistance!

CONTACT United SCP

United Static Control Products

Tame the Static Beast Before it Takes Another Byte!

ESD FLOORING!

More options in esd flooring for static control iconOur Most Popular ESD Floors! esd flooring for static control floors

1) ESD Tile Options

2) ESD Floor Paint and Sealers

3) ESD Carpet Options

4) ESD Sheet Vinyl Flooring

5) NATION WIDE Installation

ESD CONTROL PRODUCTS!

6) ESD Wrist and Heel Straps

7) ESD Ionizers

8) ESD Smocks

9) ESD Mats - Anti Static Matting

10) ESD Test Equipment

11) ESD Wax and Floor Care

12) ESD Constant Monitors

This months hottest new products for static control bullet Hot New Products! esd floors, ionizers, anti static mats and wrist straps MORE

OFFICE STATIC CONTROL!

Static control products for office environments and consumer electronics.

AMERICAN MADE ONLY!

United SCP manufactures a full range of esd floor paint, floor care chemicals and conductive concrete sealers all Made in the United States of America!

ESD Floor Care and Coating SolutionsAmerican Made anti static, static conductive and static dissipative esd floor tiles for static control bulet

United Static Control Products is proud to be an Authorized distributor for the full range of premium AMERICAN MADE static control products by Static Solutions Inc of Boston MA.  Products by Static Solutions American Made Static Control Proucts Bullet

United Static Control Products is proud to be an Authorized distributor and certified ESD Flooring installer for the full range of premium AMERICAN MADE ESD Flooring by VPI Inc. Anti Static Flooring by VPI American Made anti static, static conductive and static dissipative esd floor tiles for static control bulet

HOW TO ORDER!

How to order, your privacy, terms and conditions.

WHAT'S NEW?

Visit our new ElectraGuard static control flooring installation at Quantum in Colorado Springs, Colorado. This 27,000 square foot area is an addition to the existing 67,000 square feet we've already installed!

photo esd epoxy install arrow

A big welcome home goes out to our ESD Flooring Installation and Certification Specialist just back from installing ESD Tile in Saudi Arabia! Who does the US Navy TRUST for their CRITICAL ESD Flooring Installations? Why United SCP of course!

ESD Tiles used for the Saudi ProjectAmerican Made anti static, static conductive and static dissipative esd floor tiles for static control bulet

Visit our 200,000 Square Foot ElectraGuard static control flooring (epoxy floor paint system) installed at Tyco in Mexico!

photo esd epoxy install arrow

 

  ESD
.

ElectraFlow®  SL-010

POWERFUL 190 CFM Output!

ESD Bench Top Ionizer for Static Control

Wide Coverage Horizontal Ionizing Blower

 

Select another type of ESD ionizer

 

The SL-010 esd bench top ionizer provides a wide, narrowly focused plane of ionized air to control static across a sizable area of an esd benchtop surface. This powerful yet easily controllable ionized air stream is PERFECT for electronic assembly and removing the final traces of static from insulative objects and sub assemblies. One of the most popular style esd benchtop ionizers in the industry!

 

Compare this product to the high overhead big boys! They make a great unit and so do we. BUT our SL-010 is higher output, competitively priced, ISO manufactured and higher quality! Call United SCP, save your esd program a substantial amount of money and get the high quality and performance you demand from a reliable supplier with a great ionizer and a proven track record!

 

This horizontal ESD ionizer is perfect for bench top esd ionization for static control photo

 

 Static Control ESD Ionizer ArrowPowerful 190 CFM  WIDE output, an outstanding value!

 Static Control ESD Ionizer ArrowPatented balanced ion output, no calibration required!

 Static Control ESD Ionizer ArrowTungsten long life emitter. Minimal LOW maintenance!

 esd ion arrowIon generation indicator lamp.

 Infinitely adjustable high output multi speed fan.

 Certificate of compliance at no charge with each unit.
 Static Control ESD Arrow+/- 10 volt offset voltage balance! No calibration required.
 bench top table top or shelf mount ionizationPerfect for bench top or mounting under shelves
 balanced ion arrowHeavy duty mounting bracket included at no charge!
 antistatic ionizer housingAluminum alloy housing, powder coated ANTI STATIC finish.
 CE Certified, fully Warranted and Built to last a lifetime! The SL-010 meets or exceeds the recommended technical requirements of ANSI/ESD S 20.20- 2007 tested in accordance with STM3.1.

 

SL-010 Bench Top ESD Ionizer

Price: $725.00 ea

May Special $625.00 each and free shipping!*

BUY ONLINE!    

Specifications:

 

Operating Voltage 110V/60Hz standard, 220V/50Hz optional
Current Consumption

Max. 3.30 Amp (high fan).

Min.  1.65 Amp (low fan).
Operating Temperature 32o F. - 122o F. (0 ~50°c)
Air Coverage 24" x 24"
Air Volume 45~190 CFM
Size

22" (L) x 10.5" (W) x 5" (H)"

(570mm x 255mm x 125mm)
Weight 19 Lbs (8.6kg)
Finish and casing material Antistatic powder coated aluminum alloy

 

Decay Test Results

Testing Condition
Operating Voltage: 110V/220V, Testing Voltage: 1kV to 100V, Temperature: 22°c
Distance   300mm 600mm 900mm
Decay time positive 1.2s 2.4s 4.0s
negative 1.2s 2.5s 3.9s
Offset voltage positive

< +/- 10V
negative

Note the following are overviews, please see manual (included with product) for full details.

Installation Overview:

 

The SL-010 features an attached heavy duty adjustable metal stand with a non marring, non slip base.  The SL-010 may be simply placed on work bench, bolted to the underside of a work bench shelve. The SL-010 may also be bolted to work bench overhead beams using the adjustable mounting stand included with your order.

 

Electrical Requirements: The SL-010 requires 110VAC /60Hz (standard) or 220VAC / 50Hz (optional) power.  These units must be grounded. The instrument is equipped with a 3 prong grounded US male plug (standard). Do not modify the plug or use an ungrounded 3 prong receptacle. If an extension cord is required use heavy gauge fully grounded cords only.

 

Operating Procedure: Activate the SL-010 benchtop ionizer blower by turning fan speed knob clockwise.  The ionization indicator will illuminate and indicate the presence of ionized air.  Airflow speed can easily be adjusted utilizing the fan speed knob. The time required to neutralize electrostatic potential is dependant on distance of ionizer to work surface and speed of fan. When used in electronic assembly the ionized air stream should cover as much of the working area as possible. The constant flow of ionized air prevents items from developing an electrostatic potential.

 

Routine Maintenance Overview: Clean emitters as needed. To clean ion emitter points press and turn point cleaner knob (located in middle of air outlet) clockwise approximately one turn and release. Clean air inlet and outlets as needed with a soft brush or vacuum. Vacuum or carefully brush inlets and outlets as needed. Periodically test ion output as indicated by your internal esd program or ANSI/ESD S 20.20-2007, TR53, Air Ionizer Compliance Verification (discharge time and offset voltage).  Offset voltages of >+/- 50 volts or decay times that exceed specification may indicate the need for replacement of emitters.  Normal emitter life is 3 years, replacement emitters are easy to install and available from United SCP.

 

CONTACT United STATIC CONTROL PRODUCTS!

 

United Static Control Products

P.O.B. 19252, 4878 Lake View Circle

Colorado City, CO 81019

United States of America

 

Phone: 719 676 3928     Fax: 719 676 3929

 

24/7 Tech Support (customers only)

719 676 3928 (option 8)

 

 

Major Credit Cards Accepted

 

ESD Flooring,  Mats,  Chemicals,  ESD Ionizers, and Expertise

United SCP Tames the Static Beast BEFORE it Takes Another Byte

This page last updated on

05/10/2010