HOME

Live Support

Immediate Assistance!

United Static Control Products

Tame the Static Beast Before it takes another byte!

ESD FLOORING!

More options in esd flooring for static control iconOur Most Popular ESD Floors! esd flooring for static control floors

1) ESD Tile Options

2) ESD Floor Paint and Sealers

3) ESD Carpet Options

4) ESD Sheet Vinyl Flooring

5) Installation / Certification

ESD CONTROL PRODUCTS!

6) ESD Wrist and Heel Straps

7) ESD Ionizers

8) ESD Smocks

9) ESD Mats - Anti Static Matting

10) ESD Test Equipment

11) ESD Wax and Floor Care

12) ESD Constant Monitors

This months hottest new products for static control bullet Hot New Products! esd floors, ionizers, anti static mats and wrist straps MORE

AMERICAN MADE ONLY!

United SCP manufactures a full range of esd floor care chemicals, conductive sealers and esd floor paints all Made in the United States of America!

ESD Floor Care and Coating SolutionsAmerican Made anti static, static conductive and static dissipative esd floor tiles for static control bulet

 

United Static Control Products is proud to be an Authorized distributor for the full range of premium AMERICAN MADE static control products by Static Solutions Inc of Boston MA.  Products by Static Solutions American Made Static Control Proucts Bullet

 

United Static Control Products is proud to be an Authorized distributor and certified ESD Flooring installer for the full range of premium AMERICAN MADE ESD Flooring by VPI Inc. Anti Static Flooring by VPI American Made anti static, static conductive and static dissipative esd floor tiles for static control bulet

 

OFFICE STATIC CONTROL!

Static control products for office environments and consumer electronics.

 

HOW TO ORDER!

How to order, your privacy, terms and conditions.

 

WHAT'S NEW?

Visit our 200,000 Square Foot ElectraGuard static control flooring (epoxy floor paint system) installed at Tyco !

photo esd epoxy install arrow

A big welcome home goes out to our ESD Flooring Installation and Certification Specialist just back from Saudi Arabia! Who does the US Navy TRUST for their ESD Flooring needs? Why United SCP of course!

Visit this weeks installation of ElectraGuard static control flooring at Quantum in Colorado Springs, Colorado. This 27,000 square foot area is an addition to the existing 67,000 square feet we've already installed!

photo esd epoxy install arrow

 

UltraStrong

Ground Cables for ESD Floor Runners & Bench Mats

SELECT ESD ESD BENCH MATS FOR STATIC CONTROL

 

Bench Mat Common Point Ground Cords

Dual Wrist Strap Capabilities, Multipoint Bench Mat Grounding

  • Used for grounding tabletop anti-static mats where wrist straps will be used.
  • Provides 2 grounding plugs for wrist straps with banana plugs.
  • Constructed with a 1 meg ohm resister for safety.
  • 10 mm (3/8”) female snap connection for mat.
  • 15’ grounding cord with O ring connector for ground.
  •  Mat connection snaps included (our universal mat snap kit)
  • Connect to dedicated ground or properly grounded electrical outlet (the center screw of an AC electrical face plate cover works well.

In order to operate effectively all anti static table top mats must be attached to a reliable earth ground connection. UltraStrong common point ground cords are an integral component - allowing easy placement (anywhere on the mat) and providing a female 3/8 socket for subsequent attachment to the anti static mat. To comply with industry accepted standards the wrist strap must be attached to the same ground point as the esd mat, hence the attached ground block contains 2 ea inputs for standard wrist straps. This ground cord includes our universal mat snap kit. To achieve reliable grounding of you anti static mat the kit must be attached securely to your mat (it must not be loose). Simply puncture a hole in the matting material with a screw driver, awl or punch making sure not to oversize the hole (over sizing this hole may not let the fastener contact the conductive inner scrim of some of the advanced 3 layer conductive mat materials). Place the base through the underside of the mat, select the appropriate snap (male), place above base, select the appropriate length screw, place through snap, into base and tighten securely. Use the washer to find tune compression. Attach the ground cord  to your snap, plug in wrist straps and attach the ground cord to a reliable electrical ground in your building. Each mat requires attachment to electrical ground. Mats should not be daisy chained.

Common Point Bench Mat Ground Cord
Product # 113AS

Price ea.

$8.90

BUY ONLINE


Bench Mat Standard Ground Cable

10 MM Snap (3/8)  Ground Cord / Snap Set

Bench Mat Standard Ground Cable

  • Constructed with a 1 mega ohm resister for safety
  • 10 mm (3/8”) female snap connection for mat
  • 10’ grounding cord with O ring connector for ground
  • Connect to dedicated ground or properly grounded electrical outlet as indicated below
  • Used for grounding tabletop anti-static mats where wrist straps will not be used
  • Mat connection snaps included (our universal mat snap kit).

Standard Bench Mat Ground Cord
Product # 114AS

Price ea.

$5.90


 

Floor Mat Ground Cord

Trip Resistant Heavy Duty Floor Mat Ground Cords

 

  • Easy to install on any esd or anti-static floor mat!
  • Beveled hooded fastener for reduced tripping hazards!
  • Heavy duty 3/8 fasteners!
  • Generous 15 foot ground cord!
  • Individually packaged for secure deployment!
  • Constructed with a 1 mega ohm resister for safety!
  • Male Fastener on cord, Female fastener kit for mat!
  • Fully compliant to latest standards!

In order to operate effectively all anti static floor mats must be attached to a reliable earth ground connection. UltraStrong floor mat ground cords are an integral component - allowing easy placement (anywhere on the mat) and providing a male 3/8 snap for subsequent attachment to the anti static mat. To achieve reliable grounding of you anti static floor mat the fastener kit must be attached securely to your mat (it must not be loose). Simply puncture a hole in the matting material with a screw driver, awl or punch making sure not to oversize the hole (over sizing this hole may not let the fastener contact the conductive inner scrim of some of the advanced 3 layer anti static floor mat materials). Place the base through the underside of the mat, select the appropriate snap (female), place above base, select the appropriate length screw, place through snap, into base and tighten securely. Use the washer to find tune compression. Attach the ground cord  to your snap and attach the ground cord to a reliable common point ground in your building. Each mat requires attachment to electrical ground. Mats should not be daisy chained.

Floor Mat Ground Cord
Product # 115AS

Price ea.

$8.30

BUY ONLINE


 

Under Bench Common Point Ground Block and Cable

Premium Bench Mount Ground
with parking station. 

  • Two banana jacks
  • 7 mm snaps for parking wrist strap coil cords
  • Easily mounts under front edge of bench, perfect for laminated  
  • Bottom slots for convenient wrist strap parking
  • High quality 10’ cord with ring terminal

Product # 117AS

Price ea.

$12.00

 

FREE SHIPPING Over $100 Bucks (Continental USA, Standard freight)! Call for quantity discounts! We Accept most major Credit cards!

 

ESD TABLE TOP OR FLOOR MAT MATERIAL MENU!

 

 

United SCP

4878 Lake View Circle

P.O.B. 19252, Colorado City, CO 81019

United States of America


Email Sales or Technical Support 

Direct: 719.676.3928         Fax: 719.676.3929

This site is protected by copyright and trademark laws under US and International law.

Reserved. © 1993-2010

United SCP Incorporated

Static Control on a Higher Level!

05/10/2010