|
|
.
Options in
ESD Floors / Anti Static Sheet Vinyl for Static Control
 SEAMLESS PROTECTION FROM THE DAMAGING EFFECTS OF
ELECTROSTATIC DISCHARGE (ESD)
WHY ESD SHEET VINYL FOR STATIC CONTROL FLOORS?
Cleanliness, ease of maintenance and
outstanding electrical conductivity! Let's look at a 150' x 60' area
photo . A
typical 1' x 1' ESD tile floor will have over 18,000 linear feet (nearly 4 MILES)
of seams! Also, tiles
aren't always square making the installer
"adjust" (leave small spaces between the tiles) as the
installation progresses. And, the concrete substrate is never perfectly
flat. This uneven profile leaves tile seams with slight highs and
lows. Minute spaces between the tiles and/or
deviations in the flatness, a
perfect environment for contaminant and
dirt entrapment.
CONSIDERATIONS WHEN MAKING YOUR SELECTION!
Sheet Goods?
Same 150' x 60' area, less than 2,000 linear feet and the seams
in sheet goods are
heat welded
photo. Sheet vinyl provided the ultimate in cleanliness, ease of maintenance and
outstanding esthetics! With Anti Static sheet goods a simple dust mopping makes the
flooring look like its just been damp mopped! The difference is impressive
and the looks? Outstanding!
OUR MOST POPULAR ESD
SHEET GOODS FOR STATIC
CONTROL!
ElectraFloor
Titanium Series Sheet Vinyl
- The most slip resistant, easiest to clean, lowest static
charge generation esd flooring on the market PERIOD! Beautiful!
Titanium like wear resistance and highly esd conductive. In
stock! 4' 6" and 4' widths x 66' foot long rolls (or precuts). Installed cost (including
material and labor) around $6.50 per square foot.*
 ElectraFloor
Diamond Series ESD Sheet Vinyl
- Outstanding selection, medium gloss and great slip resistance.
Available in both anti static (static dissipative) OR
esd conductive. Multiple designer colors, typically
stocked. 6' 6" x 65' rolls or precuts. Installed
cost (materials and labor) about $5.50 to $6.50 per square foot.*
 ElectraFlex
Resilient Anti Static Sheet Vinyl -
Fabulous color selection, great for flash coving up walls.
Fully heat weldable, outstanding electrical decay. Available in both
Static Dissipative OR Static Conductive. 6' 6" x 65' rolls or
precuts. Installed cost (materials and labor) around $7.00 per
square foot.*
* NOTE:
Installed cost based on nation wide averages of areas less than
2,000 square feet. Installed cost may vary depending on your
location and the actual size and complexity of your install.
WHY
UNITED FOR ESD FLOORING?
At United SCP we understand that in many cases the
success of your esd program depends on the reliable performance of your esd
flooring. Your flooring is interactive, it's part of a bigger picture. It must
perform in concert with ESD chairs, carts, shelving, trolleys
and personnel. In the past (just several years ago;) choices for quality
esd flooring (and what the floors had to achieve) were limited, now
the selections (and the new requirements of ANSI ESD S2020-2007 are extensive.
Not only do we provide the largest
selection of ESD flooring on the market we
provide unmatched engineering and installation skills
to help successfully match your
needs with the appropriate materials. We provide award winning 24/7
Tech support for our customers and their installers. Provide help in
certifying the electrical conductivity to the latest standards and are there
for our client if and when they need us! Our goal is simple and we do it well
- We provide
flawless, compliant, long term static control flooring and industry
leading engineering and installation support to back up our products!
|
|
|
