Chemical Resistance/Titanium ESD Vinyl Flooring

	Tame the Static Beast Before it Takes another Byte
CONTACT UNITED ESD		HOME
ESD CONSTANT MONITORS		ESD IONIZERS
ESD STANDARD WRIST STRAPS		ESD HEEL STRAPS
ESD METAL BAND WRIST STRAPS		ESD MATTING TEST EQUIPMENT

4s²3d²

ElectraFloor Titanium Series ESD Flooring

The powerful new element in ESD floors for static control

Titanium like wear resistance, unrivaled electrical conductivity

Titanium ESD Flooring Main Web Page

Titanium ESD vinyl flooring is resistant to most industrial chemicals. Test methods and environmental factors are an important consideration when evaluating Titanium for use with specific chemicals and long term exposure, results may vary. Pretest to your specific needs prior to use.

Chemical Resistance: Exposure time 30 minutes. Chemicals applied to top surface of flooring only.

Sulfuric Acid (50%), no effect
Sulfuric Acid (5%), no effect
Nitric Acid (Conc.), Slight Surface Attack
Nitric Acid (5%), no effect
Hydrochloric Acid (5%), slight dulling
Acetic Acid (Conc.), no effect
Acetic Acid (5%), no effect
Sodium Hydroxide (50%), no effect
Ammonium Hydroxide (28%), no effect
Methyl Alcohol, no effect
Ethyl Alcohol, no effect

Cresol, slight surface attack
Gasoline, Mineral Oil, Vegetable Oil, no effect
Chloroform, no effect

Trichloroethylene, no effect
Acetone, slight softening, no color change
Methyl Ethyl Ketone, slight surface dulling
Amyl Acetate, Ethyl Acetate, no effect
Silver Nitrate (40%), slight brown stain
Ethyl Ether, no effect
Formaldehyde (40%), no effect
Iodine, Yellow StainButyl Alcohol, no effect
Phenol, slight surface attack
Benzene, no effect
Xylene, no effect
Carbon Tetrachloride, no effect
*30% hydrogen peroxide, No visible change

*10:1 HF dip (~5% HF), no visible change

*Developer 321 (contains TMAH), no effect

(* client testing)

Short Form Performance Specifications:

ElectraFloor Titanium Series semi gloss permanently esd conductive solid vinyl industrial flooring product. Roll goods may be used as mats or flooring. Titanium Series ESD Flooring is manufactured in the European Union for United ESD Incorporated, PO Box 19252, Colorado City CO 81019. The material shall be manufactured as a co- extruded 4' 6" x 66' x .080 gauge sheet or 24" x 24" x .080 gauge tile with a hard wear resistant esd conductive top layer and a flexible full surface esd conductive supporting layer in a semi gloss finish.

Surface Resistivity Point to Point (PTP per EOS ESD S 7.1)	>1.0E04 <1.0E06 (esd conductive)
Electrical Resistance to Ground (RTG per EOS ESD S 7.1)	>1.0E04 <1.0E06 (esd conductive)
Flooring Radiant Panel ASTM E648; NBSIR 75-950: NFPA 254, Critical Radiant Flux	0.73 W/cm², Class 1
Smoke Density, ASTM E-662; NFPA 258; Average optical density in burning / smoldering mode	<450
Residual Indentation LF-475A	0.002 average
Abrasive Wear, Taber H-18 wheel, 5,000 cycles, 1,000 gm weight	1.1% loss of weight
Abrasive Wear, Taber H-18 wheel, 1,000 gm weight to wear layer penetration (end point)	>20,000 cycles, (2.0% loss of weight
Static coefficient of friction, ASTM D-2047-03, James Test average wet, dry leather	.60 approx.
Static load limit DIN 16961.2	>1,000 P.S.I.
Charge decay time per FTMS 4046-101c	much less than .17 seconds

ElectraFloor Titanium Series meets or exceeds the requirements of Federal Specifications LF-475a and SST-312b for flexibility, dimensional stability, resistance to reagents and residual indentation.

Meets latest standard of S2020: ANSI/ESD STM97.1-2006

Resistance to ground in combination with Operator / Heel Grounders / ESD Flooring

United ESD

P.O.B. 19252, 4878 Lake View Circle

Colorado City, CO 81019

United States of America

Direct: 719.676.3928 Fax: 719.676.3929

24/7 Tech Support Hotline: (USA) 719.331.0656

Sales: United States of America