ElectraGuard ESD Epoxy flooring Main Page
Outstanding wear resistance, easy to clean, high compressive strength, easy to apply (just paint on)! Powerful protection, fully EOS ESD S 2020 compliant, covers concrete AND most hard surface flooring! Installed cost 4 x less than the cheapest esd tiles! 6 x less than esd rubber and carpet!
Visit our ElectraGuard esd epoxy flooring installation in Texas Visit our ElectraGuard esd epoxy flooring installation in Colorado
ElectraGuard Tech Tips and Installation Procedures
Material Safety Data Sheet ________________________________________________________________________
SECTION I - IDENTITY ________________________________________________________________________
ELECTRAGUARD ESD EPOXY FLOOR COATING
HAZARDOUS - NO
MANUFACTURER / DISTRIBUTOR UNITED ESD.com Inc 4878 Lake View Cir Colorado City, CO 81019 Telephone Number for Information: 719-676-3928
Emergency Phone Number
Date Prepared 08/9/05
Prepared By: S. Cooper
______________________________________________________________________
SECTION II - HAZARDOUS INGREDIENTS
______________________________________________________________________
Hazardous Components PEL TWA
STEL Other Limits % CAS Reg# IDLH (opt)
2-BUTOXYETHANOL #111-76-2*
50 25 N.A.
700ppm <10
DIETH. GLYCOL METH. ETHER* N.A.
N.A. N.A.
< 7
ISOPROPANOL # 67-63-0
400 400 500
12000ppm < 6
*LISTED CHEMICAL SUBJECT TO REPORTING REQUIREMENT OF SCT.313 OF TITLE III. _______________________________________________________________________
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
________________________________________________________________________
Boiling point - 210
Specific Gravity (Water=1)
- 1.12
Vapor Pressure (mm Hg) - 0.6 Melting Point
- N.A.
Vapor Density (air=1) - 2.1 Evaporation Rate
(Butyl Acetate=1) -0.3
Viscosity (CPS) - 375
Decomposition Temperature
-NA.
Auto Ignition Temp. - NA.
Solubility in Water -COMPLETE
pH - 6.5 +/-.5
Appearance and Odor -LIGHT COLORED MILKY LIQUID, GLYCOL ODOR
_______________________________________________________________________________
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
_______________________________________________________________________________
Flash Point - TCC 142 F.
Flammable Limits
LEL - N.A. UEL - N.A.
Extinguishing media - WATER SPRAY
Fire Fighting Procedure - COOL CONTAINERS WITH WATER
Fire and Explosion Hazards - SLIGHT
_______________________________________________________________________________
SECTION V - REACTIVITY DATA
_______________________________________________________________________________
Stability - STABLE Conditions to Avoid - N.A.
Incompatibility - ACIDS, BASES, STRONG OXIDIZERS
Hazardous Decomposition or Byproduct - THERMAL DECOMPOSITION MAY YIELD
CARBON MONOXYDE
Hazardous Polymerization - WILL NOT OCCUR Conditions to Avoid - N.A.
_______________________________________________________________________________ SECTION VI - HEALTH HAZARD
DATA
_______________________________________________________________________________ Routes of entry: Inhalation
- YES
Skin - YES
Ingestion - YES Health Hazards-Acute: CAUSES EYE AND
SKIN IRRITATION, DRYNESS
CHRONIC: MAY CAUSE HEADACHE, DIZZINESS OR SENSITIZE SKIN
Carcinogenicity: NO
NTP - N.A. IARC
Monographs - N.A.
OSHA Regulated - NO Signs and Symptoms of Exposure - REDNESS, IRRITATION OF EYES, SKIN,
MUCOUS
MEMBRANES, DIZZINESS
Medical Conditions Aggravated - SENSITIZED SKIN
Emergency and First Aid Procedures -
WASH CONTACT AREAS WITH PLENTY OF WATER: 15 MINUTES.
INGESTION: GIVE MILK, WATER OR CITRUS JUICE, INDUCE VOMITING WITH OIL OF
IPECAC. CALL PHYSICIAN IMMEDIATELY, PROVIDE FRESH AIR
_______________________________________________________________________________ SECTION VII - PRECAUTIONS FOR SAFE
HANDLING AND USE
_______________________________________________________________________________ Steps to be Taken in Case Material is Released or Spilled - ABSORB
WITH RAGS, CLAY OR PAPER, COLLECT MATERIAL INTO PLASTIC CONTAINER.
WATER RINSE RESIDUES AND SMALL
AMOUNTS. (BIODEGRADABLE)
Waste Disposal Method - USE SANITARY LANDFILL DISPOSAL.
FOLLOW STATE AND LOCAL REGULATIONS (RCRA; SUBTITLE D) Precautions to be Taken in Handling and Storage -
STORE AT ROOM
TEMPERATURE, DO NOT MIX WITH OTHER CHEMICALS.
AVOID PROLONGED CONTACT. KEEP FROM FREEZING.
Other Precautions
-
KEEP OUT OF REACH OF CHILDREN !
_______________________________________________________________________________ SECTION VIII - CONTROL
MEASURES
_______________________________________________________________________________ Respiratory Protection - NOT
REQUIRED WITH NORMAL USE
IN WELL VENTILATED AREA
Ventilation
Local Exhaust - N.A.
Mechanical -
RECOMMENDED
Special
- N.A.
Other
- ASSURE FRESH AIR CIRCULATION.
Protective Gloves
- REQUIRED: RUBBER, PLASTIC
Eye Protection
- RECOMMENDED: SAFETY GLASSES
Other Protection
- N.A.
Work/Hygienic Practices - DO NOT EAT, DRINK NEXT TO MATERIAL.
WASH HANDS/FACE AFTER WORK.
_______________________________________________________________________________ SECTION IX - TRANSPORTATION
49 CFR _______________________________________________________________________________ Unit Cont. -
5,1 GAL. PLASTIC CONT.
Report Qty.
(Lbs) - NA.
OSHA - CLASS
II COMBUSTIBLE LIQUID
Labels - NO. DOT - COMBUSTIBLE LIQUID EXEMPT PER 49 CFR 173.150(F)
UN - COMBUSTIBLE LIQUID, NOT REGULATED
______________________________________________________________________________ Vendor
assumes no responsibility
for injury to vendee or third person proximity
caused problems if
reasonable safety procedures are not adhered to as stipulated |
